English
EspañolPrecautions for maintenance ofguide bar head
Author:admin Date:08-03-2020
There are some precautions for the maintenance of the guide plate head of the chain saw. Good maintenance can protect the guide plate of the chain saw, so that the chain saw can operate better and complete the work smoothly and safely.
Before the chain saw is used, the work can be carried out after the chain oil is thrown out, and it shall be soaked in the oil bowl after the work. Pay attention to the change of cutting debris in the process of work. When the serrations are not sharp, special files shall be used to make the serrations of the chain to be trimmed to ensure the sharpness of the serrations. The correct operation method is: the teeth can be reduced along the direction of cutting teeth, and only in the direction of teeth. Never pull back. The angle between the file and the chain of chain saw is the most appropriate 30 °. If the angle is too large, the chain of chain saw will be more blunt. If the angle is too small, it will cause the situation of not durable. Therefore, the angle must be well grasped, otherwise the chain saw and guide plate will not be damaged Good influence.
In addition, to protect the guide plate head, the chain saw oil must be used correctly. Chain saw oil is used to provide lubricating oil and reduce the heat of friction between chain saw and guide plate head during the cutting process of chain saw and wood, so as to protect the guide plate of chain saw. Before working, check whether chain oil of chain saw has been filled enough. After the machine is started, the chain saw shall not be operated until the chain saw oil is thrown out. The chain saw without oil refining will be annealed at high temperature during operation, which will cause the chain saw to be scrapped prematurely, and will also cause the guide plate of the chain saw and even the service life of the chain saw to be shortened.
Before the chain saw is used, the work can be carried out after the chain oil is thrown out, and it shall be soaked in the oil bowl after the work. Pay attention to the change of cutting debris in the process of work. When the serrations are not sharp, special files shall be used to make the serrations of the chain to be trimmed to ensure the sharpness of the serrations. The correct operation method is: the teeth can be reduced along the direction of cutting teeth, and only in the direction of teeth. Never pull back. The angle between the file and the chain of chain saw is the most appropriate 30 °. If the angle is too large, the chain of chain saw will be more blunt. If the angle is too small, it will cause the situation of not durable. Therefore, the angle must be well grasped, otherwise the chain saw and guide plate will not be damaged Good influence.
In addition, to protect the guide plate head, the chain saw oil must be used correctly. Chain saw oil is used to provide lubricating oil and reduce the heat of friction between chain saw and guide plate head during the cutting process of chain saw and wood, so as to protect the guide plate of chain saw. Before working, check whether chain oil of chain saw has been filled enough. After the machine is started, the chain saw shall not be operated until the chain saw oil is thrown out. The chain saw without oil refining will be annealed at high temperature during operation, which will cause the chain saw to be scrapped prematurely, and will also cause the guide plate of the chain saw and even the service life of the chain saw to be shortened.
