Important Facts About the Chainsaw Chain

The chainsaw chain is an essential component of a power tool. Made of steel links held together with rivets, it is similar in structure to a bicycle's roller chain but is more similar to a leaf chain. Chainsaws use a chain for many purposes. To get started, you'll need to learn how it works. Below are some important facts about chainsaw chains. Read on to learn how this component works and what you should look for when purchasing a chainsaw.

The pitch of a chainsaw's chain can be measured in millimetres or inches. A chain with a larger pitch will have a stronger cutting action. A chain with a large pitch is generally stronger and lighter, but it will also require more power. You can compare the pitches of chainsaw chains to determine which is right for your needs. For example, a 1/4-inch pitch chain will work well with a 14-inch chain. A chain with a larger pitch will be more powerful and easier to work with.

Once you know which chain is right for your chainsaw, you can begin tightening it. Depending on the brand and model, you may need to loosen or tighten the bolts at various points. Make sure to tighten the bolts again after adjusting the chain tension. To ensure the chain is properly tightened, you need to lift the nose of the saw and make sure the chain is parallel to the bar. This will allow you to feel the chain.

Before choosing a chain, check the pitch and drive links on your saw. Some chain saws have self-sharpening units. If you choose to remove this feature, you'll need to be very careful not to damage it. A good method is to count the drive lugs on your existing chain. This will help you find the right replacement chain. You can even check the pitch and drive lugs before you buy. The length of the chain is important to ensure safety.

If you're a woodcutter, your chain can last six months or more. But, if you're a homeowner, you can expect it to last a decade or more. For that, you may want to consider buying a new chain. It's much safer to make a purchase when you know the proper length of the chain and blade. If you're worried about your chain's durability, you should look for a different brand.

A chainsaw is not the same without a guide bar. The bar length varies from six to 24 inches, depending on the model and size of the chain. You can get an accurate chainsaw chain size by matching the length of the guide bar and the number of drive links. There are three major types of arrangements: traditional, standard, and hybrid. To select the right length, measure the guide bar and the chain itself. These are the most common types of chainsaw chains.

Before using your chainsaw, make sure it's properly oiled. If it is gas-powered, empty the gasoline tank before storing it. Also, be sure to keep the air filter clean, and replace it when necessary. Finally, make sure that the cutting links move freely and are not rusted. You also want to be careful that the chain isn't wobbling, as this could indicate loose links. The bottom of the chain should still be curved. If it's not, it is too worn to safely move the sprocket.